But I was able to get a stable OC of +120 with boost clock 1980mhz and GPUboost clock of 2100mHz. I recommend you increase this number by doubling the core clock offset. Gonna tomorrow try scanner from evga precision if this even matter. I found that using the built-in OC Scanner tool I ended up pretty close to my ultimate final core clock speeds on this GPU. Let me know ur experience using After burner. I agree and honestly the difference those 55Mhz make is completely unnoticeable in actual gameplay. This is the temperature of your GPU. We're talking like 1 fps or less difference here under load. This is the control panel – use this to overclock your core clock, memory clock, and fan speed. I recommend you increase this number by doubling the core clock offset. My experience is every single test comes back with 90% confidence and I have to take the average MHz the scan Spits out and drop it by 5Mhz to be safe. Move the slider to the right until you reach your desired offset. No oc. Adjusting the Memory Clock of your graphics card has a smaller impact on overclocking. I have persistent stuttering in games at inconsistent intervals.

But I was able to get a stable OC of +120 with boost clock 1980mhz and GPUboost clock of 2100mHz. When I used the scanner, it gave me the value of +90. Cloudflare Ray ID: 5d82cc520b550824 I also recommend you proceed with caution and make overclocking adjustments in small intervals. I recommend you increase this number by 5. You can see the core clocks are 1980 vs 2100. and only OC core, not touching mem, every single benchmak crash after start with oc scanner. Below are my two benchmarks.

I think this is your issue. I have a single PCIe cable going in with 6 pins.

Oc scanner giving me 106 Mhz and then the test option in oc scanner of msi AB boosts my core clock to 2112MHz ( a bit too high for only 106+ ) and remain stables for 20+ minutes. Before you overclock your GPU, I suggest you run a benchmark so you can compare results before and after. It’s now time to open the UNiGiNE Heaven stress testing software. So nearly 300mhz above stock. Using the same process we used when overclocking the video memory, push the GPU clock speed up by 5-10 MHz increments, checking the game window for artefacts as … Move the slider to the right until you reach your desired offset. I overclocked memory to 800+ but left stock boost ( 1695mhz ). Continue making adjustments to the Power Limit, Core Clock, and Memory Clock if necessary.

This is the memory clock speed – this can also be overclocked, but only after testing the core clock.